SS409 stainless steel (ferritic stainless steel) has the following characteristics:
Corrosion resistance
It has good resistance to most corrosive media such as acids, alkalis, and salts at room temperature, and remains stable in high temperature environments. However, it should be used with caution in chlorine-containing environments.
High temperature performance
It can withstand repeated heating below 980°C, and still maintain strength and toughness at high temperatures (about 1370-1400°C), which is suitable for high-temperature scenes such as exhaust systems and burners.
Processing performance
It is easy to cut, weld and form. During processing, attention should be paid to cleanliness to avoid contamination. The risk of carbide precipitation during welding is low, which is suitable for complex structure manufacturing.
Mechanical properties
Tensile strength is about 490 MPa, yield strength ≥900 MPa, elongation ≥15%, and it has both strength and plasticity.
Cost and applicability
The cost is lower than that of 300 series stainless steel. It is widely used in scenes such as automotive exhaust systems, building decoration, and chemical equipment, but the surface is easily scratched.
| Product Name | Stainless Steel Plate/Sheet |
| Estándar | ASTM,JIS,DIN,GB,AISI,DIN,EN |
| Material | 201, 202, 301, 301L, 304, 304L, 316, 316L, 321, 310S, 904L, 410, 420J2, 430, 2205, 2507, 321H, 347, 347H, 403, 405, 409, 420, 430, 631, 904L, 305, 301L, 317, 317L, 309, 309S 310 |
| Técnica | Estirado en frío, Laminado en caliente, Laminado en frío y Otros. |
| Anchura | 6-12 mm o personalizable |
| Espesor | 1-120mm or Customizable |
| Longitud | 1000 – 6000mm or Customizable |
| Tratamiento de superficies | BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D |
| Origen | China |
| Código SA | 7211190000 |
| Plazo de entrega | {Tiempo de entrega} |
| Servicio posventa | 24 horas en línea |
| Capacidad de producción | {Capacidad de producción} |
| Condiciones de precio | EXW, FOB, CIF, CRF, CNF or Others |
| Puerto de carga | {Puerto} |
| Plazo de pago | TT, LC,Efectivo, Paypal, DP, DA,Western Union u Otros. |
| Aplicación | 1. Architectural decoration. Such as exterior walls, curtain walls, ceilings, stair handrails, doors and windows, etc. |
| 2. Kitchen furniture. Such as kitchen stove, sink, etc. | |
| 3. Chemical equipment. Such as containers, pipelines, etc. | |
| 4. Food processing. Such as food containers, processing tables, etc. | |
| 5. Automobile manufacturing. Such as vehicle body, exhaust pipe, fuel tank, etc. | |
| 6. Electronic devices. Such as manufacturing casings, structural components, etc. for electronic devices. | |
| 7. Medical equipment. Such as surgical instruments, surgical instruments, medical utensils, etc. | |
| 8. Shipbuilding. Such as ship hulls, pipelines, equipment supports, etc. | |
| Embalaje | Paquete, bolsa de PVC, cinturón de nylon, atadura de cables, paquete marítimo de exportación estándar o como petición. |
| Servicio de tramitación | Doblado, soldadura, desbobinado, punzonado, corte y otros. |
| Tolerancia | ±1% |
| MOQ | {MOQ} |
Composición del acero inoxidable
El acero es una aleación de hierro y carbono. Los aceros inoxidables son aceros que contienen al menos 10,5% de cromo, menos de 1,2% de carbono y otros elementos de aleación. La resistencia a la corrosión del acero inoxidable y
Las propiedades mecánicas pueden mejorarse aún más añadiendo otros elementos, como níquel, molibdeno, titanio, niobio, manganeso, etc.
| Grado | C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu |
| 201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.060 | ≤0.03 | 16.00~18.00 | 3.5~5.5 | – | – | 0.08 |
| 202 | ≤0.15 | ≤1.00 | 7.5~10.00 | ≤0.060 | ≤0.03 | 17.00~19.00 | 4.0~6.0 | – | ≤0.25 | |
| 301 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 6.00~8.00 | – | ||
| 302 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 17.00~19.00 | 8.00~10.00 | – | ||
| 304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 8.00~10.50 | – | ||
| 304L | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 9.00~13.00 | – | ||
| 310S | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 24.00~26.00 | 19.00~22.00 | – | ||
| 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 10.00~14.00 | 2.00~3.00 | ||
| 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 12.00~15.00 | 2.00~3.00 | ||
| 321 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 17.00~19.00 | 9.00~13.00 | – | ||
| 430 | ≤0.12 | ≤0.75 | ≤1.00 | ≤0.040 | ≤0.03 | 16.00~18.00 | – | |||
| 2205 | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.030 | ≤0.015 | 22.00~23.00 | 4.5~6.5 | 2.5~3.5 | ||
| 2507 | ≤0.03 | ≤0.08 | ≤1.20 | ≤0.035 | ≤0.015 | 24.00~26.00 | 6.00~8.00 | 3.0~5.0 | ||
| 904L | ≤0.02 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.035 | 19.00~23.00 | 23.00~28.00 | 4.0~5.0 | 1.0~2.0 | |
| INCONEL028 | ≤0.03 | ≤1.00 | ≤2.50 | ≤0.030 | ≤0.030 | ≤28.0 | ≤34.0 | ≤4.0 | ≤1.4 | |
| MONEL400 | ≤0.30 | ≤0.5 | ≤2.00 | – | ≤0.024 | – | ≥63.0 | – | ≤34.0 | |
| INCONEL800 | ≤0.10 | ≤1.00 | ≤1.50 | – | ≤0.015 | ≤23.0 | ≤35 | 4.0~5.0 | – | ≤0.75 |
Selección de superficies
